SmartConnect

Wirelessly connect to your automatic tank gauge

SmartConnect Mobile Broadband Gateway

Having options when connecting to Automatic Tank Gauge (ATG) systems can be beneficial when the ATG is in a location that is not easily accessible to an internal network or cellular service is limited. JMM’s SmartConnect system eliminates running cables or extenders across the facility to the ATG.

JMM partners with all major wireless providers, allowing us to deploy the SmartConnect system over the majority of the country. Even with limited cellular service, the SmartConnect System will be able to communicate with the ATG.

 

Key Features

The SmartConnect Mobile Broadband Gateway utilizes a platform where JMM manages connectivity between the system and an  ATG.  This solution is best suited for owners and operators of storage tanks that need to monitor product levels, distribution and general tank management.

  • Up-to-date tank information
  • Remote monitoring and configuration capabilities
  • Compile and analyze tank data
  • Secure system data and cellular network connectivity to the internet

 

Key Benefits
  • Relieves necessity of PCI compliance, which separates the device from the network
  • Provides seamless data pass-through of ATG information
  • Client data securely hosted on JMM’s private network
  • Management of communication uptime

 

Specifications
Specifications  
Wireless Interfaces
WWAN**
LTE – North America (L5) Software defined multi-carrier (Verizon, AT&T, and Sprint) 700/850/1700(AWS)/1900 MHz; 2G/3G GSM fall back to 850/900/1700AWS/1800/1900/2100 MHz; 2G/3G CDMA fall back to 800/1900 MHz; Transfer rate (max): 50 Mbps up, 100 Mbps down, Verizon Private Network, DMNR and PNTM Approved
LTE – North America (L6) 700/850/1700(AWS)/1900 MHz; 2G/3G fall back to 850/1900 MHz; Transfer rate (max): 50 Mbps up, 100 Mbps down
LTE – Verizon (L8) 700/1700(AWS) MHz; No 2G/3G fall back; Transfer rate (max): 50 Mbps Up, 100 Mbps Down, Verizon Private Network, DMNR and PNTM Approved
HSPA+ (U9) 850/900/1700 (AWS)/1900/2100 MHz; Transfer rate (max): 5.76 Mbps up, 21 Mbps down
CDMA EV-DO (Dx)* 450 MHz; EV-DO Rev B; R-UIM support; Transfer rate (max): 14.7 Mbps up; 5.4 Mbps down
CDMA 1xRTT (Bx) 800/1900 MHz; Transfer rate (max): 153 Kbps up/down
GSM-R (R5)* 900/1800/1900 MHz (TRM-5); GPRS Class 10; Transfer rate (max): 42.8 Kbps up, 85.6 Kbps down
Connectors Ux, Lx variants: 2 x 50 Ω SMA (Center pin: female); E1, Dx, Bx variants: 1 x 50 Ω SMA (Center pin: female)
SIM Slots 2, Mini-SIM (2FF)
SIM Security Optional SIM slot cover plate
GPS*
Channels 12 channel, continuous tracking
Sensitivity Tracking1: -161 dBm; Acquisition2 (Assisted, non-LTE): -158 dBm; Acquisition (Assisted, LTE): -153 dBm; Acquisition (Standalone): -145 dBm
Protocol NMEA 0183 V3.0
Wired Interfaces
Serial
Ports 1
Standard Option of RS-232 or RS-232/422/485
Async/Sync Async
DTE/DCE DCE
Signal Support TXD, RXD, RTS, CTS, DTR, DCD, DSR, RI
Flow Control Software (XON/XOFF), Hardware supported
COM Port Redirector RealPort®
Connector DB-9
Ethernet
Ports 2
Standard IEEE 802.3
Physical Layer 10/100 Base-T
Data Rate 10/100 Mbit/s
Mode Full or Half duplex
Interface Auto MDI/MDIX
Connector RJ-45
USB
Ports 1
Standard USB 2.0
Signaling High-speed
Connector Type A
Management
Local Management Web interface (HTTP/HTTPS); CLI (Telnet, SSH, SMS, Serial Port)
Management/ Troubleshooting Tools FTP, SFTP, SCP; Protocol analyzer with PCAP for Wireshark; Event logging with Syslog and SMTP; NTP/SNTP
Memory 128 MB NAND Flash/128 MB DDR2 SDRAM
Power
Input 9-30 VDC
Consumption 6W max, 4W typical
Connector Depending on model: Locking barrel or screw-down removable terminal block
DC Power Cord* Locking barrel to bare wire
DC Power Supply* 100-240 VAC 50/60 Hz; Option of standard temperature or

extended temperature

Physical
Dimensions (L x W x H) 3.9 in x 5.2 in x 1.3 in (100 mm x 131 mm x 32 mm)
Weight 1.08 lb (0.49 kg)
Status LEDs Power, Service, WWAN, 3x Signal strength
Enclosure Material/Rating Industrial (Metal)/ IP30
Mounting Brackets for wall mount & DIN rail sold separately
Environmental
Operating Temperature *** -35° C to +70° C
Storage Temperature -40° C to +85° C
Relative Humidity 0% to 95% (non-condensing) @ 25° C
Ethernet Isolation 1.5 kV RMS
Approvals
GSM/UMTS PTCRB, NAPRD.03, GCF-CC, R&TTE, EN 301 511
CDMA/EV-DO CDG TIA/EIA-690, CDG TIA/EIA-98-E
Safety UL 60950, CSA 22.2 No. 60950, EN60950
Emissions/Immunity CE, FCC Part 15 Class B, AS/NZS CISPR 22, EN55024, EN55022 Class B
Enterprise Software
Security/VPN Stateful inspection firewall with scripting, address and port translation; VPN: IPSec with IKEv1, IKEv2, NAT Traversal; SSL, SSLv2, FIPS 197, Open VPN client and server; PPTP, L2TP; VPN Tunnels included: 5; Maximum VPN Tunnels available: 5; Cryptology: SHA-1, MD5, RSA; Encryption: DES, 3DES and AES up to 256-bit (CBC mode for IPsec); Authentication: RADIUS, TACACS+, SCEP for X.509 certificates; Content Filtering (via 3rd party); MAC Address Filtering; VLAN support; Ethernet Port Isolation
Routing/Failover IP pass-through; NAT, NAPT with IP Port Forwarding; Ethernet Bridging; GRE; Multicast Routing; Routing Protocols: PPP, PPPoE, RIP (v1, v2) OSPF, SRI, BGP, iGMP routing (multicast); RSTP (Rapid Spanning Tree Protocol); IP Failover: VRRP, VRRP+TM; Automatic failover/failback to second GSM network/Standby APN; Verizon NEMO/DMNR for Primary Wireless Access
Other Protocols DHCP; Dynamic DNS client compatible with BIND9/No-IP/DynDNS; QoS via TOS/DSCP/WRED

We are here to help with your environmental compliance needs

Learn how the APEC system can assist with managing your above ground and under ground storage tank needs

About JMM Global

JMM Global is comprised of industry veterans that are now regulatory compliance consultants. We use our collective 80 years of experience to provide an entire suite of services focused on reducing the complexity and liability associated with regulated assets. JMM offers asset management solutions to owners confronted with the mandatory compliance tasks to mitigate risk from fines and violations.